Application

Applying Derma Guard Medi

derma guard first aid box square - edited

Derma Guard Medi Application Instructions

Always start with scrupulously clean hands and treatment area.
Clean the wound gently with mild soap or antiseptic solution and pat dry with a clean cloth.
If it is possible to shave the surrounding affected area this will help with the eventual removal process.
Apply an appropriate ointment just to the wound area or prescribed medication if advised by your health care practitioner.
Cut the material to ensure a minimum margin of 25mm as a buffer around the wound for the Derma Guard Medi dressing to adhere to. Doing this will play an important role in securing the dressing. This can help prevent fluids from building up too much and the consequences of leaking.
Peel off the protective layer (non printed paper) to expose the surface that has the medical grade adhesive. This side is applied to the area to be covered.
Gently apply the Derma Guard Medi dressing and firm into position with gentle pressure.
Remove the protective (printed) layer and reaffirm adhesion is complete.

Tips for cleaning and reapplication of Derma Guard Medi protective skin film

Some wounds can weep more or less than others depending on many different factors. Excreting plasma and ‘weeping’ are a completely normal reaction to the healing process. Excessive weeping may negatively affect the adhesion of a Derma Guard Medi bandage. Should this occur, the dressing may simply need to be removed, the wound area carefully cleaned, and a new dressing applied.

When reapplying a new Derma Guard Medi dressing, the preferred method for removal of the old dressing is to find an edge and gently apply constant pressure to lift and pull the dressing back over itself in the direction of hair growth. Pulling directly upward can be painful and is not recommended. In some rare cases, certain people will ‘stick’ to the dressing more than others which can make removal more challenging. In these instances, try removing the dressing with the assistance of a warm gentle low volume shower. Applying a damp warm cloth over the dressing is also recommended. The warmth can help loosen the adhesive and ease the removal process resulting in less trauma. Taking one corner once lifted and putting tension across the whole dressing can also help release before lifting.
DO NOT use a washcloth, loofa, sponge or similar to clean a wound or tattoo area once the dressing has been removed. These cleaning materials can harbour harmful bacteria and there is no need to further aggravate the wound area with aggressive wiping actions.
NEVER directly blast a healing wound or tattoo with a high-pressure shower jet. Gentle is always best.
Once the wound area is thoroughly washed, gently pat dry with a sterile wipe or paper towel. Do not rub, as this will cause unwarranted aggravation. To allow excess moisture to evaporate leave uncovered for 15 – 20 minutes.
Before reapplying a new Derma Guard Medi dressing consider applying an extremely thin layer of an antibacterial ointment or lotion as an option.

Precautions For Use

Seek medical advice immediately for all serious wounds, deep cuts, lacerations and burns or if redness or discomfort occurs. As with all adhesive products, apply and remove carefully from sensitive or fragile skin. Derma Guard Medi is for single use only.

Derma Guard Medi is a general first aid tool and is not a replacement for professional medical care. Always seek medical attention for serious injuries or wounds. Use Derma Guard Medi as directed on the packaging and consult with a health care provider whenever in doubt.

Storage

Store Derma Guard Medi in a cool, dry place away from direct sunlight.
Keep out of reach from children and pets.
Discontinue use and consult a healthcare professional if you experience any adverse reactions.

Application

Applying Derma Guard Medi

Derma Guard Medi Application Instructions

Tips for cleaning and reapplication of Derma Guard Medi protective skin film

Precautions For Use

Storage

Contact Us

Pages

Have a Question?